Deploy Domino on AWS Elastic Kubernetes Services (EKS)

This topic describes how to deploy Domino components on Amazon Elastic Kubernetes Service (EKS). EKS is hosted on Amazon Web Services (AWS).

Create an EKS configuration file

Get the $FLEETCOMMAND_AGENT_TAG for your target release from the releases page.

Use environment variables to set some values used by the ddlctl CLI. This simplifies the commands you’ll run while installing Domino components:

unset HISTFILE
export QUAY_USERNAME=<`quay.io` username provided by Domino>
export QUAY_PASSWORD=<`quay.io` password provided by Domino>
export FLEETCOMMAND_AGENT_TAG=<Tag that corresponds to the version of Domino deployed>

Generate an EKS configuration file:
```
ddlctl create config --agent-version $FLEETCOMMAND_AGENT_TAG --preset eks
```
Important
Changing the defaults in the generated configuration can affect the deployment. If you must adjust its parameters, contact a Domino representative.
Gather Terraform values to update your configuration file:
- If you deployed your infrastructure using the terraform-aws-eks module version v3.0.1 or above, you can use the included tf.sh script:
  ./tf.sh infra output domino_config_values
- Otherwise use:
  terraform output domino_config_values

Open the domino.yml file and edit the attributes as follows:

name: The name of the deployment. This can’t be changed post-deployment.
hostname: The hostname for the Domino install (for example, domino.example.com).
autoscaler.auto_discovery.cluster_name: Name of the k8s cluster.

autoscaler.aws.region: The AWS deployment region.

Note	Configure only either `external_docker_registry` or `internal_docker_registry`. The `external_docker_registry` should only be set during new installations. If you are upgrading and have previously configured `internal_docker_registry`, you must continue to use it.

external_docker_registry: Specifies the ECR Repository URL.
internal_docker_registry.s3_override.region: AWS region for the S3 registry bucket.
internal_docker_registry.s3_override.bucket: S3 bucket name for internal Docker registry.
internal_docker_registry.s3_override.sse_kms_key_id: KMS key for S3 internal Docker registry bucket.
storage_classes.block.parameters.kmsKeyId: KMS key for block storage.
storage_classes.shared.efs.region: AWS region for the EFS system.
storage_classes.shared.efs.filesystem_id: EFS file system ID.
storage_classes.shared.efs.access_point_id: EFS access point ID.
blob_storage.projects.s3.region: S3 bucket region for projects.
blob_storage.projects.s3.bucket: S3 bucket name for projects.
blob_storage.projects.s3.sse_kms_key_id: KMS key for S3 projects bucket.
blob_storage.logs.s3.region: S3 bucket region for logs.
blob_storage.logs.s3.bucket: S3 bucket name for logs.
blob_storage.logs.s3.sse_kms_key_id: KMS key for S3 logs bucket.
blob_storage.backups.s3.region: S3 bucket region for backups.
blob_storage.backups.s3.bucket: S3 bucket name for backups.
blob_storage.backups.s3.sse_kms_key_id: KMS key for S3 backups bucket.

Configure the load balancer by adding the code below to the end of the file. Replace <SSL certificate arn> and <Monitoring bucket name> with the values for your installation. Note that the CIDR 0.0.0.0/0 for loadBalancerSourceRanges can be updated to restrict access to certain CIDR blocks.

release_overrides:
  nginx-ingress:
    chart_values:
      controller:
        kind: Deployment
        hostNetwork: false
        service:
          enabled: true
          externalTrafficPolicy: "Local"
          type: LoadBalancer
          annotations:
            service.beta.kubernetes.io/aws-load-balancer-ssl-negotiation-policy: 'ELBSecurityPolicy-TLS-1-2-2017-01'
            service.beta.kubernetes.io/aws-load-balancer-ssl-cert: '<SSL certificate arn>'
            service.beta.kubernetes.io/aws-load-balancer-type: 'nlb'
            service.beta.kubernetes.io/aws-load-balancer-internal: 'false'
            service.beta.kubernetes.io/aws-load-balancer-backend-protocol: 'ssl'
            service.beta.kubernetes.io/aws-load-balancer-ssl-ports: '443'
            service.beta.kubernetes.io/aws-load-balancer-connection-idle-timeout: '3600'
            service.beta.kubernetes.io/aws-load-balancer-cross-zone-load-balancing-enabled: 'true'
            service.beta.kubernetes.io/aws-load-balancer-access-log-enabled: 'true'
            service.beta.kubernetes.io/aws-load-balancer-access-log-emit-interval: '5'
            service.beta.kubernetes.io/aws-load-balancer-access-log-s3-bucket-name: '<Monitoring bucket name>'
            service.beta.kubernetes.io/aws-load-balancer-access-log-s3-bucket-prefix: 'ELBAccessLogs'
          loadBalancerSourceRanges:
            - 0.0.0.0/0 # should always be 0.0.0.0/0, networkPolicy does the enforcement
        config:
          use-forwarded-headers: 'false'
          ssl-ciphers: 'ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:AES128-GCM-SHA256:AES128-SHA256:AES256-GCM-SHA384:AES256-SHA256:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA'
          ssl-protocols: 'TLSv1.2 TLSv1.3'
      networkPolicy:
        ipCidrs:
          - 10.0.0.0/16   # node network
          - 100.64.0.0/16 # pod network
          - 0.0.0.0/0     # access list starts here

Note

We have switched to Network Load Balancers. Existing installs should either continue to use the existing Classic Load Balancer configuration or otherwise be prepared to adjust DNS for the replacement Network Load Balancer on upgrade, as Kubernetes will destroy the currently provisioned Classic Load Balancer when changing the configuration.

For reference, this is the old Classic Load Balancer configuration:

release_overrides:
  nginx-ingress:
    chart_values:
      controller:
        kind: Deployment
        hostNetwork: false
        service:
          enabled: true
          type: LoadBalancer
          annotations:
            service.beta.kubernetes.io/aws-load-balancer-ssl-negotiation-policy: ELBSecurityPolicy-TLS-1-2-2017-01
            service.beta.kubernetes.io/aws-load-balancer-ssl-cert: <SSL certificate arn>
            service.beta.kubernetes.io/aws-load-balancer-internal: false
            service.beta.kubernetes.io/aws-load-balancer-backend-protocol: tcp
            service.beta.kubernetes.io/aws-load-balancer-ssl-ports: '443'
            service.beta.kubernetes.io/aws-load-balancer-connection-idle-timeout: '3600'
            service.beta.kubernetes.io/aws-load-balancer-proxy-protocol: '*'
            service.beta.kubernetes.io/aws-load-balancer-access-log-enabled: 'true'
            service.beta.kubernetes.io/aws-load-balancer-access-log-emit-interval: '5'
            service.beta.kubernetes.io/aws-load-balancer-access-log-s3-bucket-name: <Monitoring bucket name>
            service.beta.kubernetes.io/aws-load-balancer-access-log-s3-bucket-prefix: ELBAccessLogs
          loadBalancerSourceRanges:
            - 0.0.0.0/0
          targetPorts:
            http: http
            https: http
        config:
          use-proxy-protocol: 'true'

Install Domino

Use the following command:

ddlctl create domino --config {filepath-of-config-created-in-previous-step}  --agent-version $FLEETCOMMAND_AGENT_TAG

Create a network policy if you use your own ingress controller

If you use your own NGINX ingress controller by specifying ingress_controller.install = false, then you need to create a network policy in the Domino platform and compute namespace.

Here is an example of a network policy that allows ingress from the nginx namespace:

kubectl -n <domino-namespace> apply -f - <<EOF
apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: external-nginx
spec:
  ingress:
  - from:
    - namespaceSelector:
        matchLabels:
          kubernetes.io/metadata.name: nginx
  podSelector: {}
  policyTypes:
  - Ingress
EOF

Set up DNS

Run the following to get the external IP to access your instance’s Domino management plane:

kubectl -n domino-platform get svc nginx-ingress-controller

You can use this to update your DNS records accordingly.

Important

Create a canonical name (CNAME) to this host in your DNS, not an address record (A record).

Validate your installation

Go to https://<YOUR-DOMAIN>/auth/
Login with the username keycloak and the password from the keycloak-http secret in the domino-platform namespace.

Use the following command to get the password:

echo -e "\nyour password is: $(kubectl get secret keycloak-http  -n domino-platform --template={{.data.password}} | base64 -d)\n"

Go to Users in the navigation pane and click Add User.
Enter the username, first name, last name, and email address, and then click Save.
Go to the Credentials tab and add a password.
Optional: Disable Temporary.
Click Set Password.
Go to Role Mappings.
From Client Roles, select domino-play.
Select the User role and add it to your user.
Go to the main page for your Domino deployment (for example, https://\<YOUR-DOMAIN\>) and sign in with your new Domino user.
Go to Environments > Domino Standard Environment Py3.8 R4.1 > Revisions and make sure the revision is active. If not, use Build Logs to try to solve the problem.
Go to Projects > Quick-start > Workspaces and launch a new workspace using Jupyter (this can take a while).
When the new workspace is created open main.ipynb and confirm that you can execute the script without errors.

Enable user registration

Use Keycloak to enable user registration, so users can access your fresh Domino install. Keycloak is a user authentication service that runs on a pod in your cluster.

User Guide

Admin Guide

API Guide

Release Notes

Deploy Domino on AWS Elastic Kubernetes Services (EKS)

Create an EKS configuration file

Install Domino

Validate your installation

Enable user registration