Install configuration reference

Key Description Required Values

schema

YAML schema version.

✓

1.6

name

Unique deployment name. This must contain the name of the deployment owner.

✓

[a-zA-Z0-9_-]+

version

Domino version to install.

✓

Supported versions: 5.11.0

hostname

Hostname Domino application will be accessed at.

✓

Valid fully qualified domain name (FQDN)

ssl_enabled

Should Domino only be accessible with HTTPS.

✓

true, false

ssl_redirect

Should Domino only be accessible with HTTPS.

✓

true, false

request_resources

Create Kubernetes resource requests and limits for services.

✓

true, false

enable_network_policies

Use network policies for fine-grained service access.

✓

true, false

Note	Requires a compatible CNI plugin for example, Calico

external_docker_registry

A URL to ECR (Amazon Elastic Container Registry), ACR (Azure Container Registry), GCR (Google Container Registry) or GAR (Google Artifact Registry). The node must have permissions to the registry.

Note	Either `external_docker_registry` or `internal_docker_registry` must be configured.

custom_certificates

Custom Certificates

✓

minimal_resources

Use the minimum amount of nodes and resources to run Domino. This may not be a stable configuration and should be used with caution.

false

cluster_domain

The Kubernete’s cluster domain name.

cluster.local

Istio

This section configures how and if an Istio Service Mesh is deployed by or integrated to Domino. A Domino-deployed Istio is for Domino use only. These configurations must only be installed and/or enabled if intra-cluster encryption in transit is required.

Key Description Required Values

Key	Description	Required	Values
`istio.enabled`	Enable Istio in deployment (that is, sidecar injection).	✓	`true`, `false`
`istio.install`	Install Istio service with Domino.	✓	`true`, `false`
`istio.cni`	Configures whether Istio installation is done with a CNI. If `true`, the installation is done with a CNI and requires fewer permissions; this is our preferred and recommended setting. If `false`, the installation will add required capabilities to every pod security policy: `NET_ADMIN`, and `NET_RAW`.	✓	`true`, `false`

istio.enabled

Enable Istio in deployment (that is, sidecar injection).

✓

true, false

istio.install

Install Istio service with Domino.

✓

true, false

istio.cni

Configures whether Istio installation is done with a CNI. If true, the installation is done with a CNI and requires fewer permissions; this is our preferred and recommended setting. If false, the installation will add required capabilities to every pod security policy: NET_ADMIN, and NET_RAW.

✓

true, false

Ingress controller

This section configures the NGINX ingress controller deployed by the fleetcommand-agent.

Key Description Required Values

Key	Description	Required	Values
`ingress_controller.install`	Install the NGINX ingress controller.	✓	`true`, `false`
`ingress_controller.gcp_static_ip_name`	On Google Cloud Platform (GCP), use a static IP address to expose nginx.		The `name` of the IP address
`ingress_controller.class_name`	Name of the ingress class for Domino.	✓	`nginx`
`istio_annotations`	Include annotations related to Istio.	✓	`true`,`false`

ingress_controller.install

Install the NGINX ingress controller.

✓

true, false

ingress_controller.gcp_static_ip_name

On Google Cloud Platform (GCP), use a static IP address to expose nginx.

The name of the IP address

ingress_controller.class_name

Name of the ingress class for Domino.

✓

nginx

istio_annotations

Include annotations related to Istio.

✓

true,false

Namespaces

Use Namespaces to virtually segment Kubernetes executions. Domino creates namespaces according to the specifications in this section. The installer requires that these namespaces do not exist at installation.

Key Description Required Values

namespaces.platform.name

Namespace to place Domino services.

✓

Kubernetes Names

namespaces.compute.name

Namespace for user executions.

✓

Kubernetes Names

Note	Might be the same as the platform namespace.

namespaces.system.name

Namespace for deployment metadata.

✓

Kubernetes Names

namespaces.istio.name

Namespace for Istio.

✓

Kubernetes Names

namespaces.*.annotations

Optional annotations to apply to each namespace

Kubernetes Annotation

namespaces.*.labels

Optional labels to apply to each namespace

Kubernetes Labels and Selectors

Storage classes

Storage Classes are a way to abstract the dynamic provisioning of volumes in Kubernetes.

Domino requires the following storage classes:

block storage for Domino services and user executions that need fast I/O.
shared storage that can be shared between multiple executions.

Domino supports pre-created storage classes, although the installer can create a shared storage class backed by NFS or a cloud NFS analog as long as the cluster can access the NFS system for read and write, and the installer can create several types of block storage classes backed cloud block storage systems like Amazon EBS.

Block

Key Description Required Values

storage_classes.block.create

Whether to create the block storage class.

✓

true, false

storage_classes.block.name

The block storage class name.

✓

Kubernetes Name

Note	Always required due to platform limitations. Cannot be "" which indicates the default storage class.

storage_classes.block.type

Type of the block storage class to use.

✓

ebs
hostpath
gce
azure-disk
ceph-rdb

storage_classes.block.base_path

Base path to use on nodes with hostpath volumes.

storage_classes.block.default

Whether to set this storage class as the default.

✓

true, false

Shared

Key Description Required Values

Key	Description	Required	Values
`storage_classes.shared.create`	Whether to create the shared storage class.	✓	`true`, `false`
`storage_classes.shared.name`	The shared storage class name.	✓	Kubernetes Name
`storage_classes.shared.type`	Type of the shared storage class to use.	✓	`efs` `nfs` `azure-file` Azure File requires outbound port 445 to be open from your Azure cluster. `cephfs`
`storage_classes.shared.efs.region`	EFS store AWS region.		For example, `us-west-2`
`storage_classes.shared.efs.filesystem_id`	EFS filesystem ID.		For example, `fs-7a535bd1`
`storage_classes.shared.efs.access_point_id`	Access Point ID		For example, `fsap-01234567`
`storage_classes.shared.nfs.server`	NFS server IP or hostname.
`storage_classes.shared.nfs.mount_path`	Base path to use on the server when you create shared storage volumes
`storage_classes.shared.nfs.mount_options`	YAML List of additional NFS mount options.		For example, `- mfsymlinks`
`storage_classes.shared.azure_file.storage_account`	Azure storage account to create file stores.

storage_classes.shared.create

Whether to create the shared storage class.

✓

true, false

storage_classes.shared.name

The shared storage class name.

✓

Kubernetes Name

storage_classes.shared.type

Type of the shared storage class to use.

✓

efs
nfs
azure-file Azure File requires outbound port 445 to be open from your Azure cluster.
cephfs

storage_classes.shared.efs.region

EFS store AWS region.

For example, us-west-2

storage_classes.shared.efs.filesystem_id

EFS filesystem ID.

For example, fs-7a535bd1

storage_classes.shared.efs.access_point_id

Access Point ID

For example, fsap-01234567

storage_classes.shared.nfs.server

NFS server IP or hostname.

storage_classes.shared.nfs.mount_path

Base path to use on the server when you create shared storage volumes

storage_classes.shared.nfs.mount_options

YAML List of additional NFS mount options.

For example, - mfsymlinks

storage_classes.shared.azure_file.storage_account

Azure storage account to create file stores.

Blob storage

Domino can store long-term, unstructured data in blob storage buckets. Only the shared storage class described previously (NFS and S3) are supported for logs. projects also support Azure storage and backups also supports both Azure and Google Cloud Storage (GCS) storage.

S3

Key Description Required Values

Key	Description	Values
`blob_storage.*.s3.region`	AWS region of the S3 bucket store.	For example, `us-west-2`
`blob_storage.*.s3.bucket`	S3 bucket name.	For example, `domino-bucket-1`
`blob_storage.*.s3.sse_kms_key_id`	KMS Key ID.	For example, `00826efc-2e4b-573d-8d0e-a4ce90811865`

blob_storage.*.s3.region

AWS region of the S3 bucket store.

For example, us-west-2

blob_storage.*.s3.bucket

S3 bucket name.

For example, domino-bucket-1

blob_storage.*.s3.sse_kms_key_id

KMS Key ID.

For example, 00826efc-2e4b-573d-8d0e-a4ce90811865

Azure

Key Description Required Values

Key	Description	Values
`blob_storage.*.azure.account_name`	Azure storage account name.	For example, `mystorage`
`blob_storage.*.azure.account_key`	Access key for the storage account.	For example, `domino-bucket-1`
`blob_storage.*.azure.container`	Name of the container in the storage account.	For example, `backups`

blob_storage.*.azure.account_name

Azure storage account name.

For example, mystorage

blob_storage.*.azure.account_key

Access key for the storage account.

For example, domino-bucket-1

blob_storage.*.azure.container

Name of the container in the storage account.

For example, backups

GCS (Google Cloud Storage)

Key Description Required Values

Key	Description	Values
`blob_storage.backups.gcs.bucket`	The bucket name.	For example, `domino-bucket-1`
`blob_storage.backups.gcs.service_account_name`	The service account name with write access to the bucket.	For example, `bucket-sa`
`blob_storage.backups.gcs.project_name`	The service account’s project name.	For example, `myproject`

blob_storage.backups.gcs.bucket

The bucket name.

For example, domino-bucket-1

blob_storage.backups.gcs.service_account_name

The service account name with write access to the bucket.

For example, bucket-sa

blob_storage.backups.gcs.project_name

The service account’s project name.

For example, myproject

Autoscaler

For Kubernetes clusters without native cluster scaling in response to new user executions, Domino supports the use of the cluster autoscaler.

Key Description Required Values

Key	Description	Values
`autoscaler.cloud_provider`	Cloud provider Domino is deployed with.	`aws`
`autoscaler.aws.region`	AWS region Domino is deployed into.	For example, `us-west-2`
`autoscaler.azure.resource_group`	Azure resource group Domino is deployed into.	Azure resource group
`autoscaler.azure.subscription_id`	Azure subscription ID Domino is deployed with.	Azure subscription ID

autoscaler.cloud_provider

Cloud provider Domino is deployed with.

aws

autoscaler.aws.region

AWS region Domino is deployed into.

For example, us-west-2

autoscaler.azure.resource_group

Azure resource group Domino is deployed into.

Azure resource group

autoscaler.azure.subscription_id

Azure subscription ID Domino is deployed with.

Azure subscription ID

AWS Auto Discovery

The cluster autoscaler supports Auto Discovery on AWS. Without any explicit configuration of specific autoscaling groups, it detects all ASGs that have the appropriate tags and refreshes them if their settings are updated directly. All ASGs must be listed with accurate min/max settings (or not listed at all) is not required as referenced below in the Groups section. ASG settings can be updated directly in AWS. The cluster-autoscaler configuration doesn’t need to be updated, and you don’t need to rerun the installer.

Key Description Required Values

Key	Description	Values
`autoscaler.auto_discovery.cluster_name`	K8s Cluster Name.	exactly match the name in AWS
`autoscaler.auto_discovery.tags`	Optional: If filled in, `cluster_name` is ignored.	For example, `- my.tag` or `[]`
`autoscaler.groups`		Must be set to `[]` if using auto_discovery

autoscaler.auto_discovery.cluster_name

K8s Cluster Name.

exactly match the name in AWS

autoscaler.auto_discovery.tags

Optional: If filled in, cluster_name is ignored.

For example, - my.tag or []

autoscaler.groups

Must be set to [] if using auto_discovery

By default, if no autoscaler.groups and autoscaler.auto_discovery.tags are specified, the cluster_name will be used to look for the following AWS tags:

k8s.io/cluster-autoscaler/enabled
k8s.io/cluster-autoscaler/{{ cluster_name }}

The tags setting can be used to explicitly specify which resource tags the autoscaler service must look for.

To disable auto-discovery and use specific groups, ensure that auto_discovery.cluster_name is an empty value.

Groups

Autoscaling groups are not dynamically discovered. Each autoscaling group must be individually specified, along with the minimum and maximum scaling size.

Key Description Required Values

Key	Description	Values
`autoscaler.groups.*.name`	Autoscaling group name.	Must exactly match the name in the cloud provider
`autoscaler.groups.*.min_size`	Minimum scaling size.	For example, `0`
`autoscaler.groups.*.max_size`	Maximum scaling size.	For example, `10`

autoscaler.groups.*.name

Autoscaling group name.

Must exactly match the name in the cloud provider

autoscaler.groups.*.min_size

Minimum scaling size.

For example, 0

autoscaler.groups.*.max_size

Maximum scaling size.

For example, 10

External DNS

Domino can automatically configure your cloud DNS provider. See external-dns for more information.

Key Description Required Values

Key	Description	Values
`external_dns.provider`	Cloud DNS provider.	For example, `aws`
`external_dns.domain_filters`	Only allow access to domains that match this filter.	For example, `my-domain.example.com`
`external_dns.zone_id_filters`	Only allow updates to specific hosted zones.
`txt_owner_id`	The owner ID in the TXT record.

external_dns.provider

Cloud DNS provider.

For example, aws

external_dns.domain_filters

Only allow access to domains that match this filter.

For example, my-domain.example.com

external_dns.zone_id_filters

Only allow updates to specific hosted zones.

txt_owner_id

The owner ID in the TXT record.

Email notifications

Domino supports SMTP to send email notifications in response to user actions and run results.

Key Description Required Values

Key	Description	Required	Values
`email_notifications.enabled`	Whether Domino must send email notifications.	✓	`true`, `false`
`email_notifications.server`	SMTP server hostname or IP.
`email_notifications.port`	SMTP server port.
`email_notifications.enable_ssl`	Whether the SMTP server uses SSL encryption.	✓	`true`, `false`
`email_notifications.from_address`	Email address to send emails from Domino with.		For example, `domino @example.com`
`email_notifications.authentication.username`	If you use SMTP authentication, the username.
`email_notifications.authentication.password`	If you use SMTP authentication, the password.

email_notifications.enabled

Whether Domino must send email notifications.

✓

true, false

email_notifications.server

SMTP server hostname or IP.

email_notifications.port

SMTP server port.

email_notifications.enable_ssl

Whether the SMTP server uses SSL encryption.

✓

true, false

email_notifications.from_address

Email address to send emails from Domino with.

For example, domino @example.com

email_notifications.authentication.username

If you use SMTP authentication, the username.

email_notifications.authentication.password

If you use SMTP authentication, the password.

Monitoring

Domino supports in-cluster monitoring with Prometheus as well as more detailed, external monitoring through New Relic APM and Infrastructure.

Key Description Required Values

Key	Description	Required	Values
`monitoring.prometheus_metrics`	Install Prometheus monitoring.	✓	`true`, `false`
`monitoring.node_exporter`	Enable Node Exporter to generate and expose hardware and OS metrics.		`true`, `false`
`monitoring.kube_state_metrics`	Enable Kube-State-Metrics to generate and expose cluster-level metrics.		`true`, `false`
`monitoring.newrelic.apm`	Enable New Relic APM.	✓	`true`, `false`
`monitoring.newrelic.infrastructure`	Enable New Relic Infrastructure.	✓	`true`, `false`
`monitoring.newrelic.license_key`	New Relic account license key.

monitoring.prometheus_metrics

Install Prometheus monitoring.

✓

true, false

monitoring.node_exporter

Enable Node Exporter to generate and expose hardware and OS metrics.

true, false

monitoring.kube_state_metrics

Enable Kube-State-Metrics to generate and expose cluster-level metrics.

true, false

monitoring.newrelic.apm

Enable New Relic APM.

✓

true, false

monitoring.newrelic.infrastructure

Enable New Relic Infrastructure.

✓

true, false

monitoring.newrelic.license_key

New Relic account license key.

Grafana Alerts

Domino supports in-cluster alerting with Grafana. To enable in-cluster alerting, a Grafana contact point needs to be defined to receive alert notifications.

Key Description Required

Key	Description	Required
`grafana_alerts.slack.name`	The display name of the Slack contact point in the Grafana UI.
`grafana_alerts.slack.channel`	The name of the Slack channel to send alerts to.
`grafana_alerts.slack.token`	The Slack app token used to authenticate to your Slack workspace.

grafana_alerts.slack.name

The display name of the Slack contact point in the Grafana UI.

grafana_alerts.slack.channel

The name of the Slack channel to send alerts to.

grafana_alerts.slack.token

The Slack app token used to authenticate to your Slack workspace.

Helm

Configuration for the Helm repository that stores Domino’s charts.

Key Description Required Values

Key	Description	Required	Values
`helm.version`	Which version of Helm to use.	✓	`2` or `3`
`helm.host`	Hostname of the chart repository.	✓	For Helm 2 this must be `quay.io` or the address of your private app server. For Helm 3 it must be `gcr.io`.
`helm.namespace`	Namespace to find charts in the repository.		Helm repo namespace. When you use official Domino repositories this must be `domino`. For Helm 3 with `gcr.io` or `mirrors.domino.tech`, use `domino-eng-service-artifacts`.
`helm.username`	Username for chart repository if authentication is required. When you use Helm 3 with charts hosted in GCR this must be `_json_key`.		Username
`helm.password`	Password for chart repository if authentication is required.		For Helm 3 this is the base64 encoded JSON key that was provided by Domino.

helm.version

Which version of Helm to use.

✓

2 or 3

helm.host

Hostname of the chart repository.

✓

For Helm 2 this must be quay.io or the address of your private app server. For Helm 3 it must be gcr.io.

helm.namespace

Namespace to find charts in the repository.

Helm repo namespace. When you use official Domino repositories this must be domino. For Helm 3 with gcr.io or mirrors.domino.tech, use domino-eng-service-artifacts.

helm.username

Username for chart repository if authentication is required. When you use Helm 3 with charts hosted in GCR this must be _json_key.

Username

helm.password

Password for chart repository if authentication is required.

For Helm 3 this is the base64 encoded JSON key that was provided by Domino.

Image registries

List of Docker registries for Domino components.

Key Description Required Values

Key	Description	Required	Values
`helm.image_registries.*.server`	Docker registry host.	✓	`quay.io` `mirrors.domino.tech`
`helm.image_registries.*.username`	Docker registry username.	✓
`helm.image_registries.*.password`	Docker registry password.	✓

helm.image_registries.*.server

Docker registry host.

✓

quay.io
mirrors.domino.tech

helm.image_registries.*.username

Docker registry username.

✓

helm.image_registries.*.password

Docker registry password.

✓

Internal Docker registry

The recommended configuration for the internal Docker registry deployed with Domino. Use override values to allow the registry to use S3, GCS, or Azure blob store as a backend store. GCS requires a service account already be bound into the Kubernetes cluster with configuration to ensure the docker-registry service account is properly mapped.

Note	Either `internal_docker_registry` or `external_docker_registry` must be configured.

Key Description Required Values

Key	Description	Values
`internal_docker_registry.s3_override.region`	AWS region of the S3 bucket store.	For example, `us-west-2`
`internal_docker_registry.s3_override.bucket`	S3 bucket name.	For example, `domino-bucket-1`
`internal_docker_registry.s3_override.sse_kms_key_id`	KMS Key ID.	For example, `00826efc-2e4b-573d-8d0e-a4ce90811865`
`internal_docker_registry.gcs_override.bucket`	GCS bucket name.	For example, `domino-bucket-1`
`internal_docker_registry.gcs_override.service_account_name`	GCS service account with access to the bucket.
`internal_docker_registry.gcs_override.project_name`	GCP project name that Domino is deployed into.
`internal_docker_registry.azure_blobs_override.account_name`	Azure blobstore account name.
`internal_docker_registry.azure_blobs_override.account_key`	Azure blobstore account key.
`internal_docker_registry.azure_blobs_override.container`	Azure blobstore container name.

internal_docker_registry.s3_override.region

AWS region of the S3 bucket store.

For example, us-west-2

internal_docker_registry.s3_override.bucket

S3 bucket name.

For example, domino-bucket-1

internal_docker_registry.s3_override.sse_kms_key_id

KMS Key ID.

For example, 00826efc-2e4b-573d-8d0e-a4ce90811865

internal_docker_registry.gcs_override.bucket

GCS bucket name.

For example, domino-bucket-1

internal_docker_registry.gcs_override.service_account_name

GCS service account with access to the bucket.

internal_docker_registry.gcs_override.project_name

GCP project name that Domino is deployed into.

internal_docker_registry.azure_blobs_override.account_name

Azure blobstore account name.

internal_docker_registry.azure_blobs_override.account_key

Azure blobstore account key.

internal_docker_registry.azure_blobs_override.container

Azure blobstore container name.

Telemetry

Domino supports user telemetry data to help improve the product.

Key Description Required Values

Key	Description	Required	Values
`intercom.enabled`	Enable Intercom onboarding.	✓	`true`, `false`
`mixpanel.enabled`	Enable MixPanel.	✓	`true`, `false`
`mixpanel.token`	MixPanel API token.	✓

intercom.enabled

Enable Intercom onboarding.

✓

true, false

mixpanel.enabled

Enable MixPanel.

✓

true, false

mixpanel.token

MixPanel API token.

✓

Support

Domino supports customer service tools to improve customer experience.

Key Description Required Values

Key	Description	Required	Values
`zendesk.enabled`	Enable Zendesk.	✓	`true`, `false`
`zendesk.token`	Zendesk API token.	✓

zendesk.enabled

Enable Zendesk.

✓

true, false

zendesk.token

Zendesk API token.

✓

GPU

If using GPU compute nodes, enable the following configuration setting to install the required components.

Key Description Required Values

Key	Description	Required	Values
`gpu.enabled`	Enable GPU support.	✓	`true`, `false`

gpu.enabled

Enable GPU support.

✓

true, false

Fleetcommand

Domino supports minor patch upgrades through an internal tool named Fleetcommand. To learn more about the telemetry being sent back to Domino, see Deployments Telemetry.

Key Description Required Values

Key	Description	Required	Values
`fleetcommand.enabled`	Enable ability for Domino staff to apply minor patches.	✓	`true`, `false`
`fleetcommand.url`	The URL to fleetcommand, Domino staff will provide this.
`fleetcommand.api_token`	Deployment-specific API token (Domino staff will provide this).

fleetcommand.enabled

Enable ability for Domino staff to apply minor patches.

✓

true, false

fleetcommand.url

The URL to fleetcommand, Domino staff will provide this.

fleetcommand.api_token

Deployment-specific API token (Domino staff will provide this).

Node selectors

Domino will by default deploy some DaemonSets on all available nodes in the host cluster. When you run Domino in a multi-tenant Kubernetes cluster, where some nodes must not be used by Domino, you can label nodes for Domino with a single, consistent label. Then, provide that label to fleetcommand-agent with the below configuration to apply a selector to all Domino resources for that label.

Key Description Required Values

Key	Description	Required	Values
`global_node_selectors`	List of key/value pairs to use as the label for the selector.	Optional	Example `global_node_selectors: domino-owned: "true"` This example applies a selector for `domino-owned=true` to all Domino deployment resources.

global_node_selectors

List of key/value pairs to use as the label for the selector.

Optional

Example

global_node_selectors:
  domino-owned: "true"

This example applies a selector for domino-owned=true to all Domino deployment resources.

Pod configurations

Global pod configuration that applies to all pods which Domino deploys.

Key Description Required Values

Key	Description	Required	Values
`global_pod_annotations`	List of key and value pairs to use as annotations that apply to all pods.	Optional	Example `global_pod_annotation: my-annotation: "abc"` This example adds an annotation `my-annotation` to all Domino pod resources.
`global_pod_labels`	List of key and value pairs to use as labels that apply to all pods.	Optional	Example `global_pod_labels: my-label: "abc"` This example adds a label `my-label` to all Domino pod resources.
`global_pod_environment`	List of name and value pairs to use as environment variables that apply to all pods.	Optional	Example `global_pod_environment: - name: MY_ENV value: VALUE` This example adds an environment variable `MY_ENV` to all Domino pod resources.

global_pod_annotations

List of key and value pairs to use as annotations that apply to all pods.

Optional

Example

global_pod_annotation:
  my-annotation: "abc"

This example adds an annotation my-annotation to all Domino pod resources.

global_pod_labels

List of key and value pairs to use as labels that apply to all pods.

Optional

Example

global_pod_labels:
  my-label: "abc"

This example adds a label my-label to all Domino pod resources.

global_pod_environment

List of name and value pairs to use as environment variables that apply to all pods.

Optional

Example

global_pod_environment:
  - name: MY_ENV
    value: VALUE

This example adds an environment variable MY_ENV to all Domino pod resources.

Image caching

These settings control the Domino image caching service, which runs as a privileged pod and uses the host Docker socket to pre-pull popular Domino environment images onto compute workers. It can be disabled.

Key Description Required Values

Key	Description	Required	Values
`image_caching.enabled`	Whether or not to deploy the image caching service.	✓	`true`, `false`

image_caching.enabled

Whether or not to deploy the image caching service.

✓

true, false

Certificate management

Key Description Required Values

Key	Description	Required	Values
`certificate_management.install`	Whether to install cert-manager. Domino requires cert-manager, but only one instance of cert-manager can be installed in any given Kubernetes cluster. If your Kubernetes cluster already has cert-manager installed, this should be false.	✓	`true`, `false`

certificate_management.install

Whether to install cert-manager. Domino requires cert-manager, but only one instance of cert-manager can be installed in any given Kubernetes cluster. If your Kubernetes cluster already has cert-manager installed, this should be false.

✓

true, false

Teleport Kubernetes agent

No teleport support is installed if teleport_kube_agent is not present.

Key Description Required Values

Key	Description	Required	Values
`teleport_kube_agent.proxyAddr`	The teleport address.	✓
`teleport_kube_agent.authToken`	The authentication token for Teleport.	✓

teleport_kube_agent.proxyAddr

The teleport address.

✓

teleport_kube_agent.authToken

The authentication token for Teleport.

✓

Elasticsearch

Key Description Required Values

Key	Description	Required	Values
`elasticsearch.enable_sysctl`	To disable the `sysctlInitContainer` (which runs as root), set the `sysctl vm.max_map_count` correctly through some other method.	✓	`true`, `false`

elasticsearch.enable_sysctl

To disable the sysctlInitContainer (which runs as root), set the sysctl vm.max_map_count correctly through some other method.

✓

true, false

Image building

A builder will use a storage cache as large as the amount specified by the cache_storage_size. When a build completes, the storage cache is reduced to the cache_storage_retention amount. The cache_storage_retention value must not be greater than the cache_storage_size.

When the underlying OS does not support user namespace mapping, like EKS, you might have to disable rootless building for deployment targets. Running rootless in an environment that does not support it defaults to using the native filesystem snapshotter and causes image building performance to drop significantly.

Key Description Required Values

Key	Description	Required	Values
`image_building.verbose`	Enable verbose logging.	✓	`true`, `false`
`image_building.rootless`	Run as a non-root user.	✓	`true`, `false`
`image_building.concurrency`	Maximum number of concurrent image builds.
`image_building.cache_storage_size`	Size of each image builder’s cache.
`image_building.cache_storage_retention`	Amount of storage to keep during garbage collection.
`image_building.builder_node_selector`	List of key/value pairs to use as the label for the selector.
`image_building.pool_sync_wait_time`	Duration after which builder cluster is inspected for idle pods.		Examples: 1h, 5m, 30s
`image_building.pool_max_idle_time`	Duration after which idle build pods are terminated.		Examples: 1h, 5m, 30s
`image_building.fetch_and_extract_timeout`	Duration the build waits to fetch and extract the remote Docker context.		Examples: 1h, 5m, 30s
`image_building.pool_endpoint_watch_timeout`	Number of seconds the worker pool waits for a buildkit pod to become ready for traffic.

image_building.verbose

Enable verbose logging.

✓

true, false

image_building.rootless

Run as a non-root user.

✓

true, false

image_building.concurrency

Maximum number of concurrent image builds.

image_building.cache_storage_size

Size of each image builder’s cache.

image_building.cache_storage_retention

Amount of storage to keep during garbage collection.

image_building.builder_node_selector

List of key/value pairs to use as the label for the selector.

image_building.pool_sync_wait_time

Duration after which builder cluster is inspected for idle pods.

Examples: 1h, 5m, 30s

image_building.pool_max_idle_time

Duration after which idle build pods are terminated.

Examples: 1h, 5m, 30s

image_building.fetch_and_extract_timeout

Duration the build waits to fetch and extract the remote Docker context.

Examples: 1h, 5m, 30s

image_building.pool_endpoint_watch_timeout

Number of seconds the worker pool waits for a buildkit pod to become ready for traffic.

Registries

Configures buildkit/hephaestus to support HTTP-only and/or self-signed registries.

Key Description Required Values

Key	Description	Required	Values
`image_building.registries.*.http`	Registry only supports HTTP.	✓	`true`, `false`
`image_building.registries.*.insecure`	Registry uses a self-signed certificate and is considedred insecure.	✓	`true`, `false`

image_building.registries.*.http

Registry only supports HTTP.

✓

true, false

image_building.registries.*.insecure

Registry uses a self-signed certificate and is considedred insecure.

✓

true, false

Cloud registry authentication

Set up cloud authentication so that the image builder can pull images from and push images to cloud container registries.

Azure

Key Description Required Values

Key	Description	Required	Values
`image_building.cloud_registry_auth.azure.tenant_id`	Azure AD Directory (tenant) ID.	✓
`image_building.cloud_registry_auth.azure.client_id`	Azure AD Application (client) ID.	✓
`image_building.cloud_registry_auth.azure.client_secret`	Azure AD Application secret, required when using a Service Principal.
`image_building.cloud_registry_auth.azure.workload_identity`	Azure AD Application (client) ID represents a Workload Identity.	✓	`true`, `false`

image_building.cloud_registry_auth.azure.tenant_id

Azure AD Directory (tenant) ID.

✓

image_building.cloud_registry_auth.azure.client_id

Azure AD Application (client) ID.

✓

image_building.cloud_registry_auth.azure.client_secret

Azure AD Application secret, required when using a Service Principal.

image_building.cloud_registry_auth.azure.workload_identity

Azure AD Application (client) ID represents a Workload Identity.

✓

true, false

Google Cloud Platform (GCP)

Key Description Required

Key	Description	Required
`image_building.cloud_registry_auth.gcp.service_account`	Service account with access to target GCR/GAR registry.	✓

image_building.cloud_registry_auth.gcp.service_account

Service account with access to target GCR/GAR registry.

✓

FIPS

Control whether Domino is FIPS 140-2 compliant.

Key Description Required Values

Key	Description	Required	Values
`fips`	Enables a FIPS compliant configuration.	Optional	true, false

fips

Enables a FIPS compliant configuration.

Optional

true, false

Note

Enabling FIPS compliance will require the following:

The Kubernetes node image must have FIPS enabled.
To ensure compliance with the fips-140-2 policy, a FIPS enabled version of Istio must be installed and enabled. This can be achieved by setting fips=true and istio.install=true. Otherwise, if you’re providing your own version of Istio, it must be FIPS compliant.
For EKS, the following must be added to global_pod_environment

global_pod_environment:
  - name: AWS_USE_FIPS_ENDPOINT
    value: "true"